How to use your wax meltS

Wam melter burning1.jpg

Remove your wax melt from the packaging, snap off one cube of wax and place in the top of your wax melt burner.  The wax will melt slowly in the dish as it heats up and releases the fragrance. When the tea light has been extinguished, the wax will re-harden ready for use next time.  Unlike candles, the wax in melts will not evaporate.

 

You can re-use the wax several times until the fragrance has completely dispersed.

When all the fragrance is gone or you want to change your wax melt, just put a tea light on underneath your hardened wax, wait around 30 seconds and simply slide the wax out of the burner. Give the bowl a wipe with a clean piece of kitchen roll to remove any leftover residue, and the wax melt burner is ready to use again.

 

Some very important bits:

 

  • Do not add water to hot wax as it can be dangerous.

  • Hot wax can cause burns to the skin so please be very careful.

  • Do Not ingest – if eaten seek emergency medical attention immediately.

  • Place your burner out of reach of children and pets.

  • Ensure your burner is not placed near drafts but in a well-ventilated area.

  • Do not leave unattended

  • Make sure you extinguish the flame before leaving the house.

  • Ensure you extinguish the tea light before you go to sleep.

  • Ensure you remove any packaging from wax melts before use.

  • If using a small oil burner -only use 1 wax cube at a time.

  • Wax melts are for external use only.

  • Hot wax can cause serious injury.

  • Wax melts are not toys.

  • Do not transport a wax melt burner while in use as melted wax can spill and cause burns.

  • Take care extinguishing your tea lights.

  • Ensure wax melts are stored in a safe place away from children as they may smell or look like sweet and they should not be eaten.

  • Wax melts do not evaporate.

  • Wax melts will eventually lose its scent and then the wax melt should be discarded.

  • Do not pour melted wax into drain.